Category: Parts

What are the parts of a water softener?What are the parts of a water softener?

A water softener is made up of 3 elements: a control shutoff, a mineral tank, and a brine storage tank These three operate in combination to get rid of the minerals from tough water, keep an eye on the circulation of water, as well as periodically clean the system via a regrowth process.

1. The mineral tank.

The mineral storage tank is the chamber where the tough water is softened. The water supply line feeds the difficult water right into the storage tank. The water seeps with the bed of resin beads, transferring the water-hardening calcium as well as magnesium ions. The water departures the container soft as well as flows via your pipes and also out to your family appliances.

2. The control shutoff

The control valve measures the quantity of water travelling through the mineral tank and right into your home. The shutoff houses a meter that tracks the quantity of water going into the mineral container As difficult water flows via the mineral storage tank, the material beads trade their salt ions for firmness ions. Gradually, this depletes the capacity of the resin to remain to efficiently soften water. Prior to the beads end up being as well strained with mineral web content to continue removing calcium and also magnesium ions, the control valve automatically starts a regrowth cycle. This optimum capability is pre-programmed right into the control valve’s onboard computer and also is based upon a series of factors, like the size of your home, the variety of owners, and the firmness of your water. Control valves are demand-initiated controllers, which allow water softening systems to be very effective.

3. The brine storage tank.

The brine tank aids the water softening system in regrowth. It is a shorter tank that rests adjacent to the mineral container. The brine container holds a very concentrated service of salt (or sometimes potassium) to recover the material beads’ positive cost. Salt is manually included in the brine container in the form of pellets or blocks. These dissolve in the water at the bottom of the container. When the control valve signs up the conditioning ability of the resin is diminishing, the hefty salt water option is extracted of the tank and purged via the resin in the mineral storage tank. If the brine storage tank runs out of salt, the water passing through the system will no longer be softened.